Installation | Load & Fill Chart | Weights




PRO-10™ should be installed from the originating head-end i.e., the electrical or telecommunications closet. Once the pathway has been established, it is important the layout of the pre-fabricated junctions be installed first. This allows for field measurements to be taken before installing the cable tray. If the straight sections are installed first, it will cause unnecessary field adjustments. Each section has loops at each end. When the sections are connected, the loop on the bottom aligns under the galvanized masked area of the adjoining section. The loop on the side slides into the outside loop guide.

Once the trays are aligned, install the 5/16" carriage bolt (included) through the loops with the threaded end to the outside of the tray. Install and tighten the flanged nuts with a 1/2" socket. This reduces the chances of damage when pulling the cables. It is not recommended that the cable tray be cut as it will interfere with the grounding characteristics and UL classification®.

PRO-10's™ wire grid cable tray systems require only one tool and very few accessory items for installation. Pre-fabricated junctions/intersections reduce 50% or more labor hours by eliminating cutting and fabrication in the field. With center hung, trapeze, wall or floor mount accessories, PRO-10™ is prepared to handle the toughest installations.

For Installations Questions Contact Customer Service at: 800-770-4700



Load & Fill Charts Plus Weights.

CM10 - (0.120")

Tray Size (D" X L") Fill Area Max# Cables 50% fill ratio* **Approx. Max. Cable Weight lbs./ft. Tested Load Capacity Sft. ***lbs./ft. 10ft.
2 x 2 x 10 4.4 44 1.452 25 15
2 x 4 x 10 8.8 86 2.838 17 14
2 x 6 x 10 13.2 130 4.29 20 10
2 x 8 x 10 17.6 174 5.742 25 12
4 x 6 x 10 25.2 252 8.316 35 17
4 x 8 x 10 33.6 336 11.088 41 20

CM20 - (0.187")

2 x 6 x 10 13.2 130 4.29 46 14
2 x 8 x 10 17.6 174 5.742 29 16
2 x 12 x 10 26.4 260 8.58 34 19
2 x 18 x 10 39.6 394 13.002 43 22
2 x 24 x 10 52.8 527 17.391 52 23
2 x 36 x 10 79.2 788 * * *
4 x 6 x 10 25.2 253 8.349 68 22
4 x 8 x 10 33.6 331 10.923 95 35
4 x 12 x 10 50.4 496 16.368 120 50
4 x 18 x 10 75.6 751 24.783 124 52
4 x 24 x 10 100.8 998 32.934 128 55
4 x 36 x 10 151.2 1502 * * *
6 x 6 x 10 37.2 370 12.21 110 48
6 x 8 x 10 49.6 493 16.269 108 47
6 x 12 x 10 74.4 739 24.387 124 52
6 x 18 x 10 111.6 1106 36.498 128 55
6 x 24 x 10 148.8 1444 47.652 154 59
6 x 36 x 10 223.2 2212 * * *

*Contact Technical Support for 36" load data.

Weights



Length

1’ 2’ 5’
2 ” 0.93 lbs 1.20 lbs 2.76 lbs
4 ” 0.98 lbs 1.29 lbs 2.93 lbs
6 ” 1.39 lbs 1.80 lbs 4.06 lbs
8 ” 1.55 lbs 2.05 lbs 4.54 lbs
6 ” 1.17 lbs 1.98 lbs 4.42 lbs
8 ” 1.29 lbs 2.19 lbs 4.90 lbs

Length

1’ 2’ 5’ 8’ 10’
6 ” 1.46 lbs 2.46 lbs 5.45 lbs 8.43 lbs 10.44 lbs
8 ” 1.65 lbs 2.75 lbs 6.20 lbs 9.60 lbs 11.90 lbs
1 2 ” 2.03 lbs 3.45 lbs 7.21 lbs 11.95 lbs 14.81 lbs
1 8 ” 2.20 lbs 4.55 lbs 10.08 lbs 15.59 lbs 19.30 lbs
2 4 ” 3.26 lbs 5.53 lbs 12.33 lbs 17.10 lbs 23.66 lbs
6 ” 1.63 lbs 2.74 lbs 6.01 lbs 9.27 lbs 11.41 lbs
8 ” 1.84 lbs 3.07 lbs 6.47 lbs 10.45 lbs 12.93 lbs
1 2 ” 2.21 lbs 3.73 lbs 8.22 lbs 12.80 lbs 15.84 lbs
1 8 ” 2.89 lbs 4.83 lbs 10.65 lbs 16.43 lbs 20.33 lbs
2 4 ” 3.45 lbs 5.81 lbs 12.89 lbs 19.95 lbs 24.96 lbs
6 ” 2.40 lbs 4.15 lbs 9.40 lbs 14.63 lbs 18.16 lbs
8 ” 2.59 lbs 4.48 lbs 10.16 lbs 15.81 lbs 19.61 lbs
1 2 ” 2.78 lbs 4.76 lbs 10.72 lbs 16.65 lbs 20.65 lbs
1 8 ” 3.45 lbs 5.86 lbs 13.09 lbs 20.28 lbs 25.13 lbs
2 4 ” 4.02 lbs 6.85 lbs 15.35 lbs 23.80 lbs 29.50 lbs
3 6 ” x.xx lbs* x.xx lb* xx.xx lbs* xx.xx lbs* x.xx lbs*

* Contact Technical Support for 36"Tray Weights.