Accessories – Cable-MGR and Select Guard Products

The following are accessories for Cable Trays and Select Guard Products

Carriage Bolts

Flat Washers

Coupling Nuts

Finned Nuts

Beam Clamp

Waterfall

Ratchet (05-CM99)

With one ratchet, you can reduce installation time up to 50%.

6″ Protective Steel Tubing (05-CM80)

This 6″ protective steel tubing is for ¼” & ⅜” threaded rod.

Universal Loop Slice (05-CM70)

This universal loop is used for mounting other hardware to the tray.

Tray Extension Offset Loop

During some installations, there may be sections that do not meet. The offset loop was designed for this. It loops bolt to the existing loops on the tray. When attached to both ends of a section, a lateral adjustment of up to 12” is possible. To adjust, slide the cable trays, fittings or offset loops to meet and then tighten the flange hex nuts.