Steel Clips for Strip Fixtures

Steel Clips for Strip Fixtures

1. Slide the supplied 20 gauge tempered cold rolled hinge clips on to the strip housing per drawing. Use two clips per slide placed approximately nine inches from each end.

2. Install strip cover plate and lamps.

3. Install LITEGARD guard by inserting outside edge wire, one side at a time, into hinge lock of clip.

4. T5, T8 & T12 bodies.

LITEGARD guards will hinge down from either side by slightly prying on clip guides on one side of the fixtures and pushing the guard edge wire up and out of the clip.

Part #: 02-CLIP-SLG

Litegard Clips
steel clips schematic