Steel Hinge Clamps for Industrial Reflectors

Steel Hinge Clamps for Industrial Reflectors

These clamps are bright zinc plated 20 gauge tempered cold rolled steel. Holes are tapped for the included 10-32 x 3/4″ thumb screw. Four hinge clamps, two per side, are provided for attachment to the outside edge wire of the guard. LITEGARD guards will hinge down from either side by slightly prying on clip guides on one side of the fixtures and pushing the guard edge wire up and out of the clip.

• Clamps are bright zinc plated 20 gauge tempered cold rolled steel.

• Holes are tapped for the included 10-32 x 3/4″ thumb screws.

• Four hinge clamps, two per side, are provided for attachment to the outside edge wire of the light guard.

Part #: 02-CLIP-LG

Steel Hinge Clamps for Industrial Reflectors
Steel Hinge Clamps schematics.jpg